For ton bag, we must all be very familiar with it, which is a kind of packaging for large-tonnage products and a large number of products, its specifications, appearance, production process, and so on are different from ordinary woven bags and plastic bags, especially in the production of warp and weft for the quality of plastic woven products have a great relationship, So how to adjust the meridional and latitudinal tensile load of ton bag manufacturers wholesale?
1. Qualified plastic knitting enterprises produce weft wire thicker than warp wire. The preferred weft wire is thicker than the warp wire. Experienced operators can feel the thickness and thinness of the shaft filament with a touch of the hand, encouraging circular weavers to choose the weft yarn thicker than the warp yarn.
2. Adjusting the tension of the shuttle weft wire is relatively uniform, which can increase the tensile load of the ton bag weft wire, and the woven cloth surface is also relatively smooth and beautiful. In particular, it is necessary to prevent the tension of a shuttle from being too tight or too loose, so as not to achieve the maximum value of all the wefting wires at the same time during the tensile load test, which reduces the tensile load value.
3. Control arc output of circular loom weft wire. Adjust the four broad rods from the ring gauge to the top of the braid and always expand tightly, that is, reduce the arc, but also uniform the weft wire tension. It is best to increase the frame height of the circular loom and reduce the arc basket of the woven cloth.
Adjusting the meridional and latitudinal tensile load of the ton bag is the above points, because the reason the product to be loaded in the ton bag is different from other bags in the design and selection of raw materials, so the selection is also very strict, I hope that the adjustment of the meridional and latitudinal tensile load of the ton bag explained in the article will be helpful to everyone.
