When the container bag is loaded, first place the bag symmetrically on the load-bearing beam of the filling machine, so that the bottom of the bag touches the ground, then open the discharge port, put it into the discharge cylinder and clamp it to prevent smoke or particulate matter. exposed. Start the filling machine to put the raw materials into the bag from the discharge port, and straighten the bag body before filling. After filling, close the discharge port. If there is a bag with a discharge opening, check whether the bottom end is tied well before filling.
FIBCs are raised in a balanced manner during loading, and electric forklifts, lifting equipment, cranes, etc. can be used according to the type of bags and the amount of cargo to be loaded. If it is carried by a forklift, the shovel plate should be adjusted to an appropriate position, and the bag body should be close to the forklift and should not be skewed. In order to ensure that the center of gravity of the bag body is balanced when lifting, keep it stable. If it is not necessary to load and ship out immediately, it should be neat and consistent when stacking, and there is no need to squeeze each other, tilt, bump, etc.
The amount of cargo carried is an aspect of the Z basis for measuring the flexible container bag. Generally, we call it a ton bag or a ton bag. The implication is that the carrying capacity is 1 ton. The level of wear resistance is a very critical part. With wear resistance, the more times it can be reused, the cost of use of the product will be reduced virtually.
Under normal circumstances, after the container bag is loaded into the truck, it should be loaded and left immediately, but if it must be stored for a period of time due to the situation, it cannot be transported out immediately. At this time, in order to prevent the material from being damaged, it should be stored in the warehouse, and the surrounding environment should be free of water and steam. , damp, cold and high temperature sources, such as outdoor storage, in addition to considering the environmental standards, you should also pay attention to cover with waterproof canvas and prevent sunlight.
