There is no reason why I can't use all glass fiber mats. It depends on my positioning and the requirements of the parts. Although I don't strongly recommend this choice. It's best to match it with some gingham cloth to play the role of reinforcing the reinforcement, similar to steel bars. At the same time, the price is lower than chopped strand mats! However, it is also possible to use all chopped strand mats. Due to its structural morphology, the interlayer bonding will be better after compounding with resin, but the bending performance will be slightly worse.
Glass fiber mats can be used as a reinforcing material when making FRP parts, but not all glass fiber mats are used alone to make the entire part.
Glass fiber mats are non-woven materials composed of chopped or continuous fiberglass. It has good flexibility and adaptability and can be used to strengthen and reinforce the structure of FRP parts.
However, it is usually not feasible to use all glass fiber mats alone to make the entire FRP part. This is because the glass fiber mat itself cannot cure or consolidate and cannot form a strong structure. When making FRP parts, it is usually necessary to combine with a resin matrix for curing so that the glass fibers and resin are bonded to each other and form a hard composite material.
The typical FRP manufacturing process involves the following steps:
Preparing glass fiber mat: Cut and pre-treat the glass fiber mat according to the required shape and size.
Pre-impregnating resin: Pre-impregnating the resin matrix on the glass fiber mat to fully impregnate the fibers.
Forming and curing: Place the pre-impregnated glass fiber mat in a mold for molding, and then cure the resin matrix by an appropriate curing method (such as heat curing or light curing).
Post-processing: After the curing is completed, the necessary process steps such as trimming, polishing and surface treatment are carried out.
Therefore, glass fiber mat is usually used as one of the reinforcing materials in the production process of FRP parts, and it can form a strong structure in combination with the resin matrix.