Introduction to the commonly used maintenance methods of ton bags: In the process of using ton bags, there must be some problems in how to pack them.
In the case of direct sunlight, the strength of the big bag dropped to 25 after a week, and 40 after two weeks, basically unusable. Therefore, big bags should be stored in a cool and clean room, avoid sunlight and rain during transportation, and keep away from heat sources, and the storage period should not exceed 18 months. In fact, a big bag can be aged within 18 months, so the validity period of the big bag should be shortened to 12 months. We should pay attention to the method and efficiency, so as not to delay the normal use of large bags and save consumption costs. If the ton bag contains granular, blocky, or fluid objects, then you should pay attention at this time, because these types of objects are fluid, and as long as the bottom is not installed properly, they will definitely lean to one side. When stacking, the bottom ton bags must be packed flat. When stacking, the bottom two rows should be placed at the same position, and the third row should be stacked upwards, so as to ensure that the ton bags full of products will not tilt to one side or even fall down. !
During the storage process, appropriate measures should be taken to make the static electricity that has occurred disappear as soon as possible. We can set up a grounding wire in the warehouse, often sprinkle water on the warehouse to keep a certain humidity, or place a conductive floor under the goods. It is also necessary to control the static electricity of the packaged items, similar to when transferring flammable and explosive items, try to reduce the shaking in and between the large bags as much as possible, reduce friction, and also change the way of loading and unloading.