If the temperature of ton bag glue powder is too high, put it in a ventilated place to let it cool naturally. The so-called natural cooling means placing hot materials indoors or outdoors, allowing the heat of the materials to dissipate naturally in the air, and the temperature will naturally drop. Natural cooling is slow and takes a long time. If the surrounding environment is cool and ventilated, the speed of natural cooling will be faster.
How to use ton bag glue powder?
Weigh a certain amount of glue powder and add cold water in proportion to stir. When adding water, gradually stir while adding, which will make the glue powder easy to dissolve and avoid clumping. The proportion of water can be adjusted according to your needs to obtain a glue solution with moderate viscosity suitable for your use. The service life of the glue solution after adjustment is inversely proportional to the temperature. The amount of glue to be adjusted needs to be determined according to the temperature, the length of the service life, etc., to avoid waste.
Gluing: Manual glue application can be done with glue knife or glue brush, and glue machine can be used for large-area glue application. Before glue application, attention should be paid to the flatness, smoothness and fit of the bonding surface. The amount of glue applied is generally controlled at 150 to 160 gm2. At construction sites such as construction sites, directly use tap water to mix glue, then add heavy calcium powder to mix it into putty. Directly apply cold water instant glue powder to the wall and directly add tap water to mix it into glue, and package it into bags or barrels for sale.
Ensure that the tools are clean before mixing. According to actual needs, add 4 to 5 kg of clean water to the container, slowly pour in the glue powder and start stirring evenly. Stir again after 2 to 3 minutes of stirring. After fully stirring, let it stand for 10 to 15 minutes to achieve the best effect.