Ton bags are generally relatively large products. This type of product is very convenient to use in our lives, and because ton bags are relatively large, there are many products that can be loaded during transportation, but we are transporting During the process, the friction of the big bag will also generate electric charge. The charged product is very harmful to the product, so we must do the work of removing the charge. Then how to remove the charge generated by the friction of the big bag?
The general big bag that is easy to conduct electricity is because there is a conductive thread on it. The shape and other parameters of this kind of big bag are the same as the ordinary big bag. The conductive thread is placed at the mouth of the bag, so we will start from here Looking for a breakthrough point is to pack the conductive wire with a non-conductive insulator to isolate the contact with the external power, so that it is easy to eliminate the source of static electricity. As for how to wrap the conductive wire of the big bag, as long as you use a non-conductive body that is not easy to scratch, there is no strict standard, but we generally use the method of wrapping plastic film.
Different manufacturers may have different opinions and have different ways to deal with it. The generation of static electricity is very annoying to the product. Therefore, it is more important to prevent static electricity, ensure production, and store. This is the work we should do well when the charge is generated in the friction of the big bag. If we do this work well, we don't have to worry about the charge product.
