When we produce and process the container bag snakeskin bag, we will speed up the ink drying speed and reduce the printing speed of the container bag. This can effectively reduce the phenomenon of ink sticking together and form a good production cycle. What we should pay attention to is not to stack the plastic container bags that have just been printed, to avoid the adhesion of the container bags due to stacking together when they are not dried out.
If this happens, there is no need to worry, it will not cause their quality problems, but it will still have a great impact on the appearance of the FIBC, so we should pay attention to this point, which is more important. Of course, when this situation occurs during the production of bulk bags, it is relatively simple to solve it. It is enough to pay attention to the production method during production. For example, when producing, pay attention to the resistance of each guide wire hole of the flat wire. , This requires that when threading, plan the angle and length of all the guide wire holes at the end of the flat wire, even if they are balanced and equal, so that the unevenness problem can be solved well.
The second is the temperature control. If the temperature is too high, this phenomenon will also be caused. It should also be noted that dust in the production environment will not affect it, because it will be affected during the processes of weaving, cutting, and printing Shake off the dust, the important thing is that the raw material itself has edge fluff, which cannot be shaken off. Therefore, good plastic container bag manufacturers will not have the problem of unevenness during the production, because they have avoided this phenomenon when they produce the container bag. In fact, many FIBC manufacturers have this problem, so we do not recommend that you buy this burr FIBC, which will affect our quality of use. If you must use it, it is recommended to be used in the industry and transportation. It will be better.
