For high-quality and frequently used packaging products, such as container bags, some defects are inevitable, and thread breakage is one of the most important problems among these defects. and how to deal with it has become an urgent need. Thread breakage is a common fault in the sewing of container bags. The quality of the stitching does not meet the requirements, the machine is improperly adjusted, the thread passing parts have sharp edges, there are problems with the operating method, the needle is not cooled sufficiently, etc., all of which will lead to thread breakage. Container bags are not allowed to have short thread phenomena.
When using a lockstitch container bag sewing machine to sew unevenly thick products and encounter thread breakage troubleshooting, in addition to considering and analyzing the above reasons one by one, you should also pay attention to thread breakage caused by two hooks. It is well known in the sewing machine industry that due to the need to allocate the action cycle in the design, the transmission ratio of the upper shaft and the rotary shuttle of the lockstitch container bag sewing machine is 1:2. That is, the upper shaft rotates one circle and the rotary shuttle shaft rotates two weeks.
Bulk bags are special plastic packaging bags for large and large-tonnage goods. Unlike woven bags, bulk bags are for large-tonnage goods, requiring strong carrying capacity and compressive resistance. This is a consensus among all of us. Therefore, the test of the compressive resistance of bulk bags is very important. What are these aspects?
In general, bulk bags are light in weight. Low cost, can be used repeatedly; high tensile strength and impact resistance, and small elongation; wear-resistant, acid-resistant, alkali-resistant, corrosion-resistant, strong and durable, can be used in harsh environments; good air permeability, easy to clean; lining the bulk bag with a film or coating a layer of plastic, it has excellent waterproof and moisture-proof properties, but at the same time it also improves the lubricity of plastic woven bags, which is not conducive to the stacking of bulk bags.