Not necessarily.
Nothing is absolute. Even though most fiberglass molds are composed of at least two parts, the surface and the structural layer, there are many cases where only a single material is used to make molds, such as epoxy resin molds. But in general, it is recommended that customers use mold gel coat, after all, a smooth and flat mold surface effect is a universal requirement.
It is not necessary to use mold gel coat when making molds.
Using mold gel coat is a common method, but there are other options to consider, depending on the needs and production process.
Mold gel coat is a liquid silicone or other elastic material coated on the surface of the model. It can form a soft outer layer to capture the details of the model and provide flexibility and durability of the mold. Mold gel coat can protect the model and provide a certain degree of flexibility and easy demolding during the mold making process.
However, if there are other options, you can consider the following alternatives:
Rigid mold: For some simple-shaped models, rigid materials such as gypsum, polymer sheets, etc. can be used to make molds without using mold gel coat. This method is suitable for models that do not need to capture details, or details can be added by other means in subsequent processes.
Apply sealant: Applying a layer of sealant, such as wax or grease, on the surface of the model can help separate the model from the mold material. This method can reduce the use of mold gel coat, but may require additional steps to protect the model and achieve demolding.
Segmented mold: For large or complex models, you can consider dividing the mold into multiple parts, using appropriate mold materials such as silicone, plaster, etc., for each part. This can avoid the use of mold gel coat, but you need to pay attention to ensure the connection and sealing between the mold parts.
The most appropriate method needs to be selected according to the specific situation and the requirements of mold making. Mold gel coat is a common and convenient option, but it is not the only option. Depending on factors such as the complexity of the model, the required materials, budget and time, you can choose a mold making method that suits you.