+86-317-4168868

Let's understand the packaging role of ton bags

Feb 13, 2025

During the loading and unloading of ton bags, special attention should be paid to the use of FIBC. The following points have been collected for your reference. Do not stand under the FIBC during the lifting of ton bags. Please hang the hook on the ton bag or the center of the ton bag, do not hang it diagonally, hang it on one side or hang it on the bag. During the operation of the ton bag, do not rub, hook, or collide the bag with other objects.


Do not pull the ton bag in reverse. When operating the FIBC with a forklift, do not let the fork touch or pierce the bag to prevent puncture. When transporting in the workshop, please use pallets as much as possible, avoid hanging bags with a large number of hooks, and carry them while shaking. When loading, unloading, and stacking, keep the bag upright. Before each use, carefully check whether the ton bag has defects, and check whether the product markings and technical parameters meet the requirements.


If product markings or product defects are found, the ton bag should be stopped immediately and the packaging manufacturer should be asked to inspect it. During the use of ton bags, please regularly check whether the ton bag has defects or damage, including damage caused by wave pollution, which may also affect the safety of the continued use of the ton bag. If it is suspected that it is not suitable for continued use, or any required markings have been lost or are difficult to identify, the ton bag must be stopped and handed over to personnel for inspection.


The flatness of the ton bag should be good. To overcome the defects of general plastic ton bags, the flatness is good and the printing effect is also good. Improvement work should be carried out from many aspects. Increase the number of teeth of the gear motor and the gear motor during production, increase the weaving force, stabilize the tension of the cloth reel, etc. The price of the ton bag manufacturer is not only cheap but also very safe and practical in design. During the production process, the product is easy to generate static electricity due to friction. Pay attention to prevent static electricity from causing safety accidents.

 

Send Inquiry