Powder raw materials packed in ton bags are a relatively common packaging form in powder production now, so in the actual production process, how to realize dust-free unloading, automatic transportation, and uniform feeding of powder packed in ton bags requires the help of Some automation is required. How to stack big bags!
1. If the ton bag contains granular, massive, or fluid objects, then you should pay attention at this time, because these objects are fluid, and as long as the bottom is not installed properly, they will definitely tilt to one side, so when loading When the product is produced, the bottom must be packed flat. When stacking, the bottom two rows should be placed at the same position, and the third row should be cross-stacked upwards, so as to ensure that the ton bags full of products will not tilt to one side or even fall !
2. If the ton bags are packed with large products, it is also necessary to put the relatively flat side on the bottom, and then put them in. The ton bags filled with large products should only be stacked in one layer as far as possible, because considering the size of the product Security, so don't put too much.
3. When the ton bag is transported, for the convenience of stacking, no matter what the shape is, the upper and lower bottoms are sewn to hide the inlet and outlet. However, it should be noted that the lower base fabric is also woven with 14X14 high-denier flat wire due to its large force, and the upper base fabric can be woven with ordinary woven bags. Most manufacturers use 14X14 high denier flat wire to weave the upper and lower bottom. In this way, we can make full use of the space when palletizing!