Plastic woven FIBC manufacturers, also known as load bags, are one of the common container items for manufacturers and enterprises. Plastic woven FIBCs have high requirements for plasticity, and they cannot be cut by fiber laser with sharp objects. However, in many cases, the plastic woven FIBC manufacturers will crack due to mishandling or wrong operation. In many cases, the cracks of the plastic woven FIBC can be repaired and then used again. What is the craftsmanship that it destroyed?
If the crack is not big, you can use hand sewing to make it. There are many sewing methods, such as straight stitching. This type of stitching method is used to splice fabrics, and the joints are flat and thin. Starting from the reverse side of the fabric, the needle angle of the face shot is straight, while the needle angle on the reverse side is oblique. The syringe passes from the bottom to the top, and the top and bottom ends are aligned. Bow needles; the front needle angles are thin, short, and neatly arranged. It can be used to design and decorate the edge of clothing and to reinforce the interface of clothing. Then use mosquito knots (this kind of method is used to connect the cable. When the cable is not long enough, you can use this kind of method to increase. Wrap one wire into a circle, and the other wire is wound in it. Squeeze tightly, then tighten each other.) Fixed and unchanged quality.
If the mouth is relatively large, manual maintenance is time-consuming and laborious, and equipment can be used for maintenance. This is relatively simple. It will be split on the operation panel of the electric sewing machine of the plastic woven container bag manufacturer, and the automatic sewing will be started immediately.
The plastic woven container bag is made of pp stainless steel wire drawing material, which has good airtightness and is not easy to expose tiny particles during packaging. After being filled with high wear resistance, it can be lifted by mechanical equipment. The plastic woven container bag has a very large capacity, which can easily load a lot of raw materials, and then use mechanical equipment to transport them away, saving a lot of human resources and speeding up the transportation. Due to the role of the raw material, the product is waterproof, moisture-proof and stain-resistant, not only can maintain the raw material is not easy to be eroded during the entire transportation process, but also can be better stored.
After repairing the plastic woven FIBC manufacturer, the carrying capacity of the repaired plastic woven FIBC is mostly worse than that of the original detailed plastic woven FIBC manufacturer. Under the condition of use, pay attention that it does not need to be fully loaded.