+86-317-4168868

Sewing standards for FIBC

Jan 04, 2024

Because of the special purpose of container bags, there are strict requirements for their quality. Understand its sewing requirements, which will directly affect the quality of the container bag.
1. The sewing size is ±1CM according to the requirements of the process sheet, and the needle pitch is 0.7-0.9CM/needle.
2. Use sewing thread as required. The sewing thread cannot overlap, leak seams, floating threads, leaky buttons, or go under the kang. The upper and lower threads must be tight and tight.
3. The needle lift of the container bag must be within 10CM from the corner.
4. For the seam between the main body and the bottom, align the double-folded edges. Sew 3 lines with a width of about 2CM. No obvious wrinkles are allowed. The lines are even and do not overlap. The stop needle presses the needle start.
5. Reinforcement cloth, cover cloth, and chrysanthemum opening (10CM×10CM) are not allowed to loose silk or hot melt.
6. When sewing container bags, the starting and ending needles must overlap 5CM on the same suture line (the stopping needle presses the starting needle). The starting needle of the reinforced fabric is on the upper left side, 1CM away from the seam line and the edge. For sewing material bags, the starting needle is away from the edge. 1CM, lift the needle and lower the needle.
7. The length of the sewing thread should not exceed 1.5 cm.
8. Slings, reinforcement fabrics, and wrapping fabrics cannot be sewn in the wrong position, crooked, offset, or twisted.
The quality of the container bag depends on the base fabric, sewing standards, etc., so to ensure quality, no negligence can be made in any production process.

4 Cross Corner Loop FIBC

 

Send Inquiry