+86-317-4168868

Tensioned bag introduction

Oct 12, 2021

Stretched-reinforcement ton bag is a special bag in the container bag. It is to sew four stretched-reinforcement pieces at the inner four corners of the ton bag, so as to ensure that the bag will not become cylindrical after being filled with goods because of the expansion around the bag body. It has a good effect on the plasticity of the bag body.


The inner stretch bag is generally used for the transportation volume of color song requirements, after the use of the stretch bag, the shape of the bag remains square. In storage or transportation can be very regular placement, avoid large space waste, the overall placement effect is also more beautiful. So in the design process should pay special attention to, below, tons of bag processing custom manufacturer ding letter to share this knowledge with you. 1. When selecting the material of the base cloth in the design of the ton bag, the weight of the cargo should be clear first, and the volume of the ton bag should be determined according to the specific gravity of the materials. It also depends on whether the loading material is sharp and hard block material. If it is sharp, it is suggested that the base cloth should be thicker when designing the ton bag, but it can be thinner. In the actual design, the load of 500kg tons of bags, base cloth generally choose (150-170)G/m2, base cloth longitudinal and transverse tensile strength ()N/5cm, elongation 20-35%. Tons of bags with a load of more than 1000kg. Base cloth generally selected (170210)G/m2, base cloth longitudinal and transverse tensile strength ()N/5cm, elongation 20"35%. To ensure the base cloth strength, we must improve the tensile strength of flat wire.

QQ20160929172034_ -


Send Inquiry