The market demand potential of ton bag products is very great, and the development prospect is very broad. According to the content, the goods are divided into two categories: bulk cargo container bags and small package cargo container bags, which are suitable for one-time use and turnover use. According to the shape, it is divided into three types: round, square and U-shaped. The lifting structure has top hanging type, side hanging type and bottom hanging type, usually with inlet and outlet.
Under the condition of direct sunlight, the strength of the big bag will be reduced to 25 after one week, and will be reduced to 40 after two weeks, which is basically unusable. Therefore, ton bags should be stored in a cool and clean room, protected from sun and rain during transportation, and should not be near heat sources, and the storage period should not exceed 18 months. In fact, the big bag may be aging in 18 months, so the validity period of the big bag should be shortened, and it should be 12 months. Pay attention to methods and efficiency, so as not to delay the normal use of container bags and save production costs. If the ton bag contains granular, blocky, or fluid objects, then you must pay attention at this time, because these types of objects are fluid, and as long as the bottom is not installed properly, they will definitely lean to one side. When stacking, the bottom ton bags must be packed flat. When stacking, the bottom two rows should be placed at the same position, and the third row should be cross-stacked upwards, so as to ensure that the ton bags full of products will not tilt to one side or even fall down.
If the ton bags contain large products, it is also necessary to put the flat side down and then put them in. The ton bags filled with large products should only be stacked in one layer, because considering the safety of the product, So don't put too much.