In the process of manufacturing container bags, there are many processes, one of which is the wire drawing process. The width of the wire and the lightness of the pulling force directly determine the quality of the container bag.
When drawing, after extruding the plastic film, you need to pay attention to the following matters. After the extruded molten film is cooled, the appropriate knife distance is selected according to the type of flat filament for cutting. When cutting, try to maintain the uniformity of the film. The cut flat film needs to be heat-stretched to obtain a flat yarn with greater tensile strength. However, in order to prevent the flat yarn from being greatly shortened during the subsequent weaving process, it should also be heat-set. After such a series of cutting and drawing tests, the quality of the container bag can be characterized.
1. Due to the relatively large holding capacity of the ton bag, it can be poured in all at once, and it can also be taken out all at once. It is very easy for products with relatively large usage.
2. Because the ton bag needs to carry a large amount of weight, its quality is very good. If it is not artificially damaged, it is still a very good value for secondary use.
3. Ton bags are generally made of refined polypropylene materials, and most of them are white. If used properly, they can be environmentally friendly and recycled.
4. Ton bags are also called container bags or ton bags. They have good tensile strength and strong ductility.