How to use the container bag correctly
First of all, during the hoisting operation, personnel should not stand under the ton bag to avoid danger; during the operation, do not let the ton bag rub against other items, hook or collide with the ton bag, and must pay attention to make the hook hang on the sling or The central part of the sling shall not be slanted, single-sided or slanted. Tons of bags can be used two or more times, but there shouldn't be any breakage in doing so, as the quality and price of the raw materials used for this large packaged product are very expensive. Therefore, if it is only used once, it will produce a lot of waste, cause certain pollution to the environment, and delay the full utilization of resources, while multiple utilization is a combination of social value and resource utilization.
Secondly, do not stand under the square container inflatable bag during the hoisting operation to avoid accidents; when the ton bag manufacturer is loading, keep the square ton bag upright when stacking and unloading. When it is necessary to store it outdoors, the square big bag should be placed on the shelf, and the square big bag should be tightly covered with an opaque awning cloth. After that, wrap the customized big bag with opaque shed cloth or paper and place it in a ventilated place.
Loss in the production of ton bags:
Wire drawing: This process is one of the most expensive processes in the production of plastic ton bags. There are 4 links to produce losses: plastic sheets and plastic blocks that do not form films when melt extruded into films; when the films are cooled and cut into broken wires There are hard edges on both sides; the monofilament after shaping is sucked into the waste wire in the waste wire box when it is wound to the bobbin. Every time you change different specifications, varieties, colors, and remove the consumption of the filter. Weaving: In this process, the consumption is also relatively large, and there are 3 processes to produce consumption: the monofilament bobbin rotates on the warp frame, and needs to be arranged in an orderly manner, the jumper is threaded, and there are wool and floating filaments when piercing the button. , the generation of dirty silk; the production of wool, floating silk and dirty silk when the weft is packed into the shuttle that moves in a circular motion; every time the woven fabric specifications of different widths and units are changed, the front and rear extradition of monofilament , the consumption of the monolithic process.