Steps for unloading tons of bags with pallets:
Direct packing operation of ton bag unloading (with pallet)
1. The on-site tally clerk receives the delivery driver, and informs the delivery truck to enter the operation area. The parking of the vehicle should consider whether it is safe, convenient to operate, can not occupy the road, and should leave access for other vehicles;
2. According to the relevant regulations of the company, instruct the drivers to unpack the tarpaulin, open the roof, operate according to the requirements of the packing list and inform the stevedovers and forklift drivers of the operation matters;
3. Open a first job on the site to configure 2 stevedovers, an ordinary forklift can be;
4. During the operation, a loader on the truck is responsible for monitoring the forklift shovel cargo, so as to prevent the goods in front of the shovel from breaking. A loading and unloading worker at the mouth of the box is responsible for monitoring the goods placed in the box, and the on-site tallyman is responsible for supervision and inspection of the whole link;
5. Forklift shovel all goods fork can't insert in the tray, cargo, it doesn't matter against the pallet fork guardrail, rises the goods back after the fork, the goods leave the 15 to 20 cm in front of the goods the goods fork down, on the goods against the fence by tight, unloading translation to box in front of the shovel to break (to prevent the discharge of the goods packaging);
6. In packing operation, when placing the second batch of each box, it is 10cm away from the front goods, the cargo fork is on the ground, and the cargo fork is 10cm away from the cargo fork. When raising the cargo fork, it is close to the front goods (to prevent the front goods packaging from being broken during operation), the loader will monitor the truck in the box, pay attention to the route of the forklift truck in and out of the box, command on the side of the box, and pay attention to safety.