① Use container bags to produce primary materials.
First, hang the container bag lifting ring symmetrically on the beam of the filling machine so that the bottom of the container bag is basically in contact with the ground. Then open the filling port of the container bag, insert it into the charging barrel, and clamp it with the clamping device to prevent Dust or particles escape. Start the filling machine to put the raw materials into the bag from the filling port. When filling, straighten the bag body first and then fill. After filling, close the filling port. If a container bag with a discharge opening is used, check whether the bottom is tied properly before filling.
② Loading the vehicle.
Hang the container bag lifting rings evenly on the lifting equipment. Depending on the type and loading weight of the container bag, a forklift, crane, crane, etc. can be used. If a forklift is used to lift the container bag, the shovel plate should be adjusted to the appropriate position, and the container bag should be close to the forklift and do not tilt forward. To ensure the balance of the bag when hoisting, be careful not to hang a single ring. Then, start the lifting equipment to slowly lift the container bag. After reaching a certain height, place it evenly on the train (or car) platform. If they do not need to be loaded and transported immediately, they should be stacked neatly and uniformly at the work site. During the hoisting and stacking process, they should not be squeezed, tilted, or collided with each other.
③ Storage.
In principle, the container bag should be loaded and taken away immediately after being loaded with materials. However, if the situation requires that it cannot be transported immediately, to avoid damage to the materials, the container bag should be stored in a warehouse and the environment should be away from water, steam, moisture and When storing high-temperature sources outdoors, in addition to meeting the above environmental conditions, you should also cover them with tarpaulin and avoid direct sunlight.
④ Unloading.
Lift the container bag with a forklift or crane, aim it at the mouth of the trough or other container, and open the material opening tether at the bottom of the bag body. The material can fall on its own to complete the unloading. For disposable container bags, a suitable tool can be used to pierce the bottom of the bag from a distance and then the material can be discharged. During lifting and unloading operations, do not stand under the container bag.