The production process for plastic ton bags is as follows:
Raw materials -> drawing -> weaving -> coating -> cutting -> printing -> sewing -> inner bags -> inspection -> finishing -> packaging -> storage.
In the above production process, drawing, weaving, coating, cutting, printing, and inner bags are all major stages that generate waste.
1. Drawing:
This process is one of the processes that generate waste in the production of plastic ton bags. Four stages generate waste: 1.1 Plastic flakes and lumps that are not formed during melt extrusion into film; 1.2 Hard edges on both sides of the film when the film is cooled and cut into broken strands; 1.3 Waste that is sucked into the waste compartment when the shaped monofilament is wound onto the bobbin; 1.4 Waste that is generated each time the product is changed to a different size, color, or when the filter is cleaned.
2. Weaving:
This process also generates significant consumption, with three steps generating consumption: 2.1 The rotating monofilament bobbins on the warp rack, which need to be arranged in an orderly manner, threaded through the jumper bar, and threaded through the buckle, generate lint, loose threads, and dirty threads; 2.2 The weft yarns are packaged and fed into the circular shuttle, which generates lint, loose threads, and dirty threads; 2.3 The forward and backward transfer of monofilaments and single sheets each time a different width or unit weight of woven fabric is required.
3. Coating:
The coating process is the second process with the highest unit consumption, with three sub-steps generating consumption: 3.1 The burrs of single-sheet bulk bag fabric need to be trimmed after coating; 3.2 The high-temperature plastic melt that does not form a film during the melt extrusion of the raw materials; 3.3 The forward and backward transfer of single sheets and composite woven fabric each time a different width or unit weight of woven fabric is required.
4. Cutting:
The cutting process is the third process with the highest unit cost, generating six major cost points: 4.1. The shape of the inlet and outlet varies, resulting in varying unit costs. For example, a conical inlet connected to the bag body results in greater material waste. This is also affected by the length of the inlet; the longer the inlet, the greater the unit cost. 4.2. Bag body cost. The bag flap is connected to the inlet. A larger inlet requires more fabric to be removed from the flap. Similarly, the size of the base flap and the outlet also influences unit cost. 4.3. Separator bags. Separator bags are designed to prevent bulging around the bag after loading, hindering transportation and storage, and saving space. Each separator has numerous holes to facilitate smooth material flow. The size and number of holes removed contribute to the highest unit cost. 4.4. Round bags also require significant cost. Not only do the inlet and outlet require holes in the flap and bottom, but the flap and bottom must also be cut into a circular shape, further increasing unit cost. 4.5. The consumption of suspenders and tie straps is relatively small. This is generally due to small amounts of loose threads and loose yarns when the weaving machine is threading the loops and buckles when changing styles. Since 4.6 uses professional automated production equipment, any time lags caused by thread breakage or malfunctions will inevitably affect the quality of the fabric, straps, and other base materials. Therefore, waste is incurred during cutting to remove substandard base materials.
5. Printing:
When printing patterns or text on ton bags, there are wastes associated with positioning, proofreading, and ink color.
6. Inner Bags:
Inner bag waste is primarily caused by uneven blow molding control, resulting in excess waste from cutting.
7. Sewing:
The sewing thread used in the sewing process for ton bags is negligible and has minimal unit consumption.