First of all, determine that the quality of ton bags is definitely different. Generally, ton bags are divided into many types, including ton bags for food, ton bags for chemicals, ton bags for waste materials, and ton bags for general products. There are tons of bags for powder.
Tons of food bags
Generally, the heaviest ton bag for food is only 1.5 tons. Because of the low density of food, the volume of 1.5 tons is quite large, and the volume is too large. Generally, forklifts are not easy to fork and load, so Most customers of large bags are controlled below 1 ton. First, to make large bags of food, it is necessary to achieve comprehensive food safety. Starting from the workshop, at least you must have a dust-free workshop, that is, a fully sealed workshop, which is disinfected. , Wait for a series of supporting facilities to be perfect, and then pass the inspection of the relevant departments, and after the inspection is qualified, the production license will be issued.
All the raw materials must be sealed and then sterilized and placed in the workshop for later use. During the bag making process, try not to put the sewing thread end of the bag or the oil from the machine into the bag, which will cause the inspection to be unqualified. The bag must pass the quality inspection at the end. Blowing. After a series of actions, the quality of the bags, the materials used, and the cost of all aspects have also greatly increased, so the food-grade ton bags are the most expensive.
Chemical Ton Bag
The requirements for the production of chemical bags are not as high as those for food ton bags. There are many types of chemical ton bags, including high-end powder (such as purified terephthalic acid) and low-end mineral powder (quartz sand, calcium carbonate, etc.). High-end chemical products have very high requirements on the quality of the materials. The quality must not be broken, and the chemical products must not leak, because leakage is prone to pollution, and the quality of the bag must also be very good. The selection of materials is also not sloppy. The bags are generally required to be printed. The main chemical industry is to indicate the various ingredients, etc., as well as the matching ziplock bags, inner film bags, and the beauty of the bag body. . The price of high-end chemical ton bags is relatively high. The low-end mineral powder generally does not have high requirements for dust prevention. As long as you do not stain the general manufacturers, it does not matter, and you can even use second-hand large bags for reuse.
Tons of bags for waste
This is the cheapest of all ton bags. It is mainly used to pack various production waste materials (such as waste wire, scrap iron filings, sludge, etc.). It has the lowest requirement as long as it can be loaded. There is no requirement for load-bearing, but It’s good if it’s not broken. Some manufacturers don’t require a small amount of damage. Therefore, in this industry, various ton bag manufacturers try their best to produce cheap bags, only to meet the needs of customers, as long as the price is cheap. .
In summary, we will understand that the price of a ton bag of the same size is tens of yuan per piece, 20 to 30 yuan, and even more than a dozen yuan. The materials used between them are absolutely different. The simplest point is to compare the weight of the bags, the degree of aging resistance, and the number of repeated uses.
Therefore, it is recommended that customers clearly state the size of the ton bag, how to do it, how many loads, and other requirements when making an inquiry. In this way, we can match the best plan and make the best offer. Remember, just give it a size, some even pack 1 ton, (different products, the volume used is not the same) other elements are not given, so we can not accurately calculate the price.