+86-317-4168868

Quality Standards For FIBC Bags

Nov 19, 2021

1. FIBC should be made strictly in accordance with the requirements of . The appearance should be beautiful, wireless head, no pollution, no damage, clear printing pattern of the container bag, accurate position.


2. The parts are not allowed to have defects, peculiar smell, base cloth, firm coating film, no bleaching film phenomenon.


3. Sewing requirements:

1) The sewing size should be 1CM as required by the craft sheet, and the stitch length should be 07-0.9CM/needle.

2) The start and stop needles must overlap the SCM on the same winding line (the needle is pressed against the start), the reinforcement cloth starts at the upper left, the stitching, the margin is 1CM, the dimensional material bag is the start and the margin is 1CM, and the needle is started Knock down the needle.

3) Use the sewing thread as required. The sewing thread is not allowed to have overlaps, omissions, floating threads, missing buttons, lower kangs, etc., and the upper and lower threads have the same tightness.

4) The length of the thread end of the sewing thread should not exceed 1.5CM.

5) The starting needle of the square bag must be within 10cm from the angle.

6) Slings, reinforcing cloths, and wrapping cloths are not allowed to have wrong positions or crooked dimensions. Dimension partial. Stitching phenomenon.

Only the raw body is connected to the bottom, and the double-folded edges should be aligned. Sewing 3 threads with a width of about 2CM. No obvious wrinkles are allowed. The threads are even and do not overlap. The needle is pressed against the needle.

7) The sewing thread of the sling is 0.SCM from the side, and the sewing thread is 1CM from the head of the sling. The main sling should be evenly divided.

8) Reinforced cloth, cover cloth, chrysanthemum mouth (10CMX 10CM), do not allow any de-filing or hot melt.

9) Sewing the chrysanthemum-shaped mouth reinforcement cloth, the stringing part is 3CM, the remaining part is 2CM, and the cover cloth is 100M.

10) The opening and discharging are connected to the top and bottom, and the innermost suture presses the top. The inner circle mark at the bottom is not allowed to cross. When sewing the second stitch, the distance from the first stitch is about 0.5cm, and it is not allowed to overlap.

11) The main seam is located under the sling, with a width of 3CM (clearing consumption 12CM), and 3 lines.

12) Casting and discharging ties, rope heads, and labels are on the same axis.

13) The quality inspection number, re-inspection number and sewing job number on the label must be clear.


4. Folded according to specifications, neat and beautiful appearance.

The LOCK lock should be flat.

The drape should be laid flat.

Knotting at the outlet is important.

The rope head is 10-15CM, which has a slight tightening feeling.


5. The transparency of the inner bag should be good, "the surface is free of impurities, spots, pollution, heat sealing is firm, no turbulence, damage, etc., effective size +1CM to-2CM.


Send Inquiry