After the FIBC is produced and before being put into use, in order to have a good performance, it is usually necessary to conduct a pressure test first. Only the FIBC that has passed the pressure test is the qualified container. bag. So do you know how to carry out the pressure test of the FIBC? In fact, when it comes to the pressure test method of the FIBC, it can be said to be very simple and rude. Since it is a pressure test, it is of course necessary to install something for the test. The specific operation method will be introduced for everyone below.
During the pressure test, the full-load container bag needs to be placed on the press for a pressure test. The pressure applied by the press is four times the full load of the container bag, or the static load method is used, that is, four-layer full bag If the content does not overflow and the bag body is not damaged, it means that the container bag has passed the test. During the drop test, lift the full-load container bag with a lifting device. The bottom of the bag is more than 0.8m away from the ground, and then drop vertically once to a hard and flat ground. If the content does not overflow, the container bag body will not If it is damaged, it means that it has passed the test.
The pressure test of FIBCs is usually carried out in accordance with the above methods. The FIBCs tested in this way are also very convincing. Our company has very rich experience in the production of pressure-resistant bags. , And we know a lot about some other related knowledge of FIBC, so if you want to learn more about FIBC through us, you can contact us for some relevant understanding, I believe you will It will be rewarding.
