In some industries, several tons of bags are used for product packaging due to the transportation needs of tons of bags. For example, in the textile industry, we know that in the textile industry, thread and cloth products are easy to burn after generating static electricity, causing transportation accidents. If we want to solve this problem, it is necessary to solve the electrostatic phenomenon of several tons of bags.
Ton bags, also known as container bags, are plastic woven bags. Because it can hold a large amount of capacity, it is called a big bag. It is a comparison of regional powdered cargo or other long-distance cargo with commodities. One of the packaging methods, so how to prevent static electricity in the bag during use.
1. Control the packaged items from static electricity, similar to the transfer of flammable and explosive items, minimize the shaking in and between bags, reduce conflicts, and change the way of loading and unloading as follows.
2. During the storage process, appropriate measures must be taken to quickly dissipate the static electricity that has occurred. We can set up grounding wires in the warehouse. The warehouse is often sprinkled with a certain humidity and may be placed under the conductive floor of the product.
3. Three-sided seal seals around the bag. The front and rear dimensions are the finished size, which has a certain sense of integrity. The design is not limited, and the front and rear designs have a certain consistency. Because the front and rear are the same size, the front can be designed to allow rear and front echoes. When making plates, they are arranged on the same platen roller.
4. Seal on the back of the back cover, the front size is the finished product size, the back is divided into two equal parts, and the sum of the widths is equal to the front width, usually the front and back are integrated in the design, and 1cm is added to the left and right sides The seals, front and back are also on the same press roll.
5. On the basis of the three-dimensional stamp, add three-dimensional two sides, the front, back and side 3 are also on the same plate roll.
6. Due to the limitation of printing materials, the paper must be designed separately on the front and back, and separately from the plate making, and cannot appear on the same plate cylinder at the same time.