When connecting container bags and slings, there will be many forms in the future, and the connection method is also very special. So what is the connection process? The details of the container bag manufacturer's analysis are as follows: Connection When connecting the suspension to the bag body, the top suspension, the bottom suspension and the side suspension come in many forms, and they are connected by the suture line, so the suture line is also important.
Due to the high strength of the sling, the bottom cloth and stitches cannot reach a certain strength, nor can the overall performance of the container bag be guaranteed. Container bags mainly hold bulk, granular or powdered items, and the physical density and porosity of the contents have significantly different effects on the overall result. As for the basis for judging the performance of container bags, it is necessary to test with products as close as possible to the customer to be loaded.
This is written in the standard as "standard filling materials for testing" in order to make the technical standard meet the challenges of the market economy as much as possible. Generally speaking, the container bags that pass the lift test are not a problem. If the bag does fall during port, rail or truck lifting, there are only two cases: one is that the operation is incorrect, and the other is that the container bag fails the lifting test.
For container bags that can achieve more than 5 times the safety factor, even if the two straps are fixed, the tensile performance of two or one of the four rings must exceed two and a half times the rated load. After crushing, the container bag in general will not have a problem. Bulk bag products have a wide range of applications, especially for packing bulk, cement, grains, chemical raw materials, feed, starch, minerals and other powders, particulate matter, and even dangerous items such as calcium carbide. Easy to load, unload, transport and store.