During the production of ton bags, menopause sometimes occurs. This is a very common phenomenon, so we must try to avoid this situation. Let's first understand what causes menopause. In the future, pay attention in the production process. The ambient temperature is too low. The ambient temperature is too low. Procedure Usually, when the temperature is below 5 ° C, the flat line becomes significantly brittle, and the chance of breaking the line will be greatly increased.
Below 10°C, brittle fracture may occur. Low ambient humidity is not sensitive to the temperature of flat wire breakage. In general, when the relative humidity is below 50%, it is easy to break the line. However, the ambient temperature is low and the relative humidity is low, and the wires are easy to break. The strength of a single warp is low. The reason for the low warpage strength of a single paper plastic woven bag may be.
During transportation turnover, the surface or both ends of the spindle are scraped by a hard device, and there are large amounts of impurities, unmelted masterbatch or crystallization points. Flat fiber structure. Except for recyclable materials, menopause is usually not interrupted due to the fineness or narrowness of a single flat filament. Flat velvet. Some lint flat yarns begin to split after passing through various thread holes and brown silk holes during weaving. The split yarn is then crushed by the shuttle, and the friction of the barrier causes the broken yarn to occur frequently.
Bamboo and blemish silk. It is difficult for thick and thick rods to break through brown holes. The bamboo silk itself is not stretched, the strength is low, and the brown silk holes are slightly blocked, that is, the silk may break. The above 4 points will cause incoming tide in the woven bag, so everyone tries to avoid this situation and reduce incoming tide in this step.