Regarding the aging of plastic container bags: in the natural environment, that is, under the condition of direct sunlight, the strength of plastic container bags will be reduced to 25% after one week, and will be reduced by 40% after two weeks, which is basically can no longer be used. That is to say, the storage and storage of plastic container bags is very important.
Plastic container bags are made of polyethylene and polypropylene by drawing, weaving, sewing or pasting, and the loading weight is generally 25-50kg. Because of its good tensile strength, low price and convenient transportation, it is widely used in the packaging of powder and granular materials such as cement, chemical raw materials, fertilizers, minerals, grain, and sugar. increasing trend year by year.
In addition, after the cement is packed in plastic container bags, it is exposed to direct sunlight in the open air, which will accelerate the decline of its strength; during storage and transportation, the temperature is too high (container transportation) or it encounters rain, which will also cause its strength to decline, so as to reach The quality requirements for protecting the contents are not met. Therefore, the transportation and storage conditions of plastic container bags are very important. Therefore, both GB/T8946 and GB/T8947 have clear regulations on storage and transportation conditions, that is, plastic container bags should be stored in a cool and clean room, and should be protected from sunlight and rain during transportation, should not be close to heat sources, and the storage period should not exceed 18 months. In fact, the plastic container bag may age in 18 months, so the validity period of the plastic container bag should be shortened, and 12 months should be appropriate.
Regarding the issue of recycled materials of plastic container bags, in order to ensure the packaging quality of plastic container bags, great attention should be paid to the aging of plastic container bags. For this reason, the competent department of the national building materials industry has required that recycled materials and recycled materials are not allowed in the production of plastic bulk bag raw materials, and the amount of fillers added should be strictly limited to no more than 5%. At the same time, the laminating temperature should be strictly controlled. Avoid the problem of accelerated aging of plastic Fib Cs due to process problems. Excessive addition of recycled materials is also one of the reasons for the aging of plastic container bags.