In addition to performance and traceability, sustainable practices are also becoming increasingly important in the bulk bag liner industry.
Apr 24, 2025
A container bag, also known as a flexible container bag, ton bag, space bag, etc., is a flexible and foldable packaging container, usually made of high-strength synthetic fiber mat
Apr 09, 2025
In conclusion, the market for FIBCs is thriving, driven by their durability, efficiency, and cost-effectiveness. Businesses across a wide range of industries are turning to jumbo b
Apr 03, 2025
Can two or more layers of chopped fiberglass mat be continuously rolled? Generally, customers are advised to operate in a single layer. If you want to speed up the production, you
Apr 22, 2025
For solidified resin, the fastest way to remove it is physical removal, such as grinding and shovel cleaning, etc. As for chemical corrosion, etc., I think it is not suitable for t
Apr 21, 2025
It is common for the resin to feel sticky after it has dried. This problem occurs with most unsaturated or vinyl resins because the resin reacts with oxygen when it cures. You can
Apr 18, 2025
Which is better, release agent or release wax? I prefer solvent-based semi-permanent release agent for two reasons: high gloss and low residue, which is incomparable to release wax
Apr 17, 2025
Vacuum infusion is a method of curing resin into fiber reinforcements by applying vacuum pressure to promote resin penetration and curing. The resin content in the process can vary
Apr 16, 2025
Silicone is generally a safe and non-toxic material. Silicone is a polymer composed of silicon oxygen chains. It has excellent heat resistance, chemical resistance and flexibility.
Apr 15, 2025
Not necessarily. Nothing is absolute. Even though most fiberglass molds are composed of at least two parts, the surface and the structural layer, there are many cases where only a
Apr 14, 2025
Crystal glue is generally epoxy resin glue, so heating is a good idea the premise of adding the curing agent correctly. Bake at 30℃ for 1-2 hours, then heat to 60-80℃ and bake for
Apr 11, 2025
Whether you choose unsaturated or epoxy casting resin, it is normal to have unevenness after the resin is cured. This is because the volume of the resin shrinks. But sometimes it i
Apr 10, 2025